| • |
Solvent
Based Coatings |
| |
-
UV Lacquer
RFQ Quantity
|
| |
|
Product
Name
|
System
|
Description
|
| POLYFIL-UV-EP-9060R |
Filler
|
UV
Filler with high transparency; fast curing and
easy to sand. |
| POLYSEAL-UV-PU-9011R |
Basecoat
Sealer
|
Acrylate
polyurethane-based UV sanding sealer; good chemical
resistance and easy to sand. |
| POLYSEAL-UV-PE-9088R |
Acrylate
polyester-based UV sanding sealer; good chemical
resistance and easy to sand. |
| POLYSEAL-UV-EP-9099R |
Acrylate
epoxy-based UV sanding sealer; good chemical resistance
and easy to sand. |
| POLYCLEAR-UV-PU-AR9010R
(Gloss/Matt) |
Topcoat
|
Acrylate
polyurethane-based UV lacquer topcoat; good chemical
resistance and good abrasion resistance. |
| POLYCLEAR-UV-PU-AL9020R
(Gloss/Matt) |
Non-yellowing
acrylate polyurethane-based UV lacquer topcoat;
good chemical resistance and excellent abrasion
resistance. |
| POLYCLEAR-UV-PE-9080R
(Gloss/Matt) |
Acrylate
polyester-based UV lacquer; good flexibility,
good chemical resistance and good abrasion resistance. |
| POLYCLEAR-UV-EP-9090R
(Gloss/Matt) |
Acrylate
epoxy-based UV lacquer with excellent hardness,
good abrasion resistance and good chemical resistance.
|
| POLYSTAIN-UV-9898 |
Stain
|
Acrylic based UV
stain; specially designed to raise the wood grain;
excellent adhesion and good wiping properties;
available in many colours. |
|
| |
|
| |
-
Polyester Lacquer (P.E. LACQUER)
RFQ Quantity
|
| |
|
Product
Name
|
System
|
Description
|
| POLYSEAL-PE-3773 |
Clear
Sealer
|
High
built PE sealer with good hardness, easy to sand
and easy to work on. |
| POLYCLEAR-PE-3883
(Gloss) |
Clear
Topcoat
|
High
built PE lacquer with excellent gloss retention,
good hardness and good chemical resistance. |
| POLYCOAT-PE-3993
(White) |
Pigmented
Undercoat
|
High built PE undercoat
primer with good hardness, easy to sand and easy
to work on. |
|
| |
|
| |
-
Polyurethane Lacquer (P.U. LACQUER)
RFQ Quantity
|
| |
|
Product
Name
|
System
|
Description
|
| POLYSEAL-PU-381 |
Clear
Sealer
|
High
solid two-pack PU sealer; excellent for polishing
timber furniture; fast drying, easy to sand and
good adhension. |
POLYSEAL-PU-382
|
High
solid two-pack PU sealer; suitable for disk application;
fast drying, easy to sand and good adhension. |
| POLYSEAL-PU-386 |
High
solid PU sealer; excellent for polishing timber
furniture; fast drying; easy to sand and good
adhesion. |
| POLYCLEAR-PU-105
(Gloss) |
Clear
Topcoat
|
Single-pack
PU moisture cure lacquer; provide a hard-flexible
film when cured fully; mainly developed for easy
hand spray or brush application. |
| POLYCLEAR-PU-731
(Matt) |
Solid
two-pack PU clear matt lacquer; excellent durability
and good chemical resistance. |
| POLYCLEAR-PU-735
(Gloss) |
Two-pack
PU lacquer with good chemical resistance, good
gloss retention and excellent durability. |
| POLYCLEAR-PU-737
(Matt) |
Two-pack
PU door matt lacquer; excellent chemical resistance
and good hardness; suitable for disk application. |
| POLYCLEAR-PU-738
(Matt) |
Matt
PU lacquer; excellent chemicals resistance and
good hardness; suitable for disk application. |
|
POLYCOAT-PU-2002
(White/Black)
|
Pigmented
Undercoat
|
Two-pack
PU modified undercoat for all timber substrates;
fast drying and good adhension. |
| POLYCOAT-PU-2020
(White/Black/Colour) |
Two-pack
PU undercoat for all timber substrates; fast drying,
good filling and good adhension. |
| POLYPIGMENTED-PU-401
(White/Black/Colour/Matt) |
Pigmented
Topcoat
|
Two-pack PU pigmented
matt lacquer with good chemical resistance, excellent
yellowing resistance and hardness. |
| POLYPIGMENTED-PU-404
(White/Black/Colour/Gloss) |
Two-pack PU pigmented
gloss lacquer with good chemical resistance, excellent
gloss retention and hardness. |
|
| |
|
| |
-
Acid-Curing Lacquer (A.C. LACQUER)
RFQ Quantity
|
| |
|
Product
Name
|
System
|
Description
|
| POLYSEAL-AC-551 |
Clear
Sealer
|
High
solid two pack AC sealer with good sanding and
filling properties; suitable for timber and MDF
board. |
| POLYSEAL-AC-580 |
High
solid two-pack AC sealer with good sanding and
good filling properties; suitable for timber and
MDF board. |
| POLYSEAL-AV-581 |
High
solid two-pack AC sealer with good sanding and
good filling properties; suitable for disk application. |
| POLYCLEAR-AC-512
(Gloss/Matt) |
Clear
Topcoat
|
High solid two-pack
AC lacquer with good levelling and good adhension;
suitable for disk application. |
| POLYCLEAR-AC-513
(Gloss/Matt) |
Non-yellowing two-pack
AC lacquer with good gloss retention and good
chemical resistance. |
| POLYCLEAR-AC-516 |
High
solid two pack AC top coat with good gloss retention
and chemicals resistance. |
| POLYCLEAR-AC-525(Gloss/Matt) |
High solid two-pack
AC lacquer with good levelling and good adhension. |
| POLYCOAT-AC-9000
(white/Black) |
Pigmented
Undercoat
|
High solid two-pack
AC undercoat with fast drying properties, high
opacity and easy to sand. |
| POLYPIGMENTED-AC-168
(White/Black/Colour/Gloss/ Matt) |
Pigmented
Topcoat
|
Two-pack pigmented
AC topcoat with good coverage, good gloss retention
and good chemical resistance; available in a range
of colours. |
|
| |
|
| |
-
Nitrocellulose Lacquer (N.C. LACQUER)
RFQ Quantity
|
| |
|
Product
Name
|
System
|
Description
|
| POLYSEAL-NC-802 |
Clear
Sealer
|
Medium
solid NC sealer with high viscosity and rapid
drying properties; help to seal and fill the grain
of timber for further finishing. |
| POLYSEAL-NC-845 |
High
solid NC sealer with medium viscosity and rapid
drying properties; help to seal and fill the grain
of timber for further finishing. |
| POLYSEAL-NC-840 |
High
solid NC sealer with high viscosity and rapid
drying properties; help to seal and fill the grain
of timber for further finishing. |
| POLYCLEAR-NC-808
(Gloss/Matt) |
Clear
Topcoat
|
High
solid NC lacquer for wood furniture topcoat; fast
drying and easy to work on. |
| POLYCLEAR-NC-833 |
High
solid NC topcoat with high viscosity and rapid
drying properties;easy to work on. |
| POLYCLEAR-NC-835
|
High
solid NC lacquer for wood furniture topcoat; fast
drying and easy to work on. |
| POLYCLEAR-NC-838 |
High
solid NC lacquer for wood furniture topcoat; fast
drying and easy to work on. |
| POLYCLEAR-NC-D908
(Gloss/Matt) |
NC
topcoat mainly developed for dipping and brushing
application; fast drying, good gloss retention
and good adhension. |
| POLYCOAT-NC-823
(White/Black) |
Pigmented
Undercoat
|
NC
undercoat with high viscosity, fast drying, good
adhension and easy to sand. |
| POLYPIGMENTED-NC-804
White/Black/Colour/Gloss /Matt) |
Pigmented
Topcoat
|
Pigmented NC topcoat
with fast drying, good coverage and good gloss
retention; available in many colours. |
| |
|
|
|
| |
|
| • |
Water-Based
Polyurethane & Acrylic Lacquers (WB LACQUER)
RFQ Quantity
|
| |
|
Product
Name
|
System
|
Description
|
| POLYSEAL-WB-2727 |
Clear
Sealer
|
Aromatic
urethane-acrylic copolymer WB sealer; mainly for
parquet and wood furniture. |
| POLYCLEAR-PE-WB-2323
|
Clear
Topcoat
|
Acrylic
copolymer WB top clear lacquer; mainly for exterior
use. |
| POLYCLEAR-WB-2626 |
Aliphatic urethane-acrylic
copolymer WB top clear lacquer; excellent chemical
resistance, good abrasion resistance and good
yellowing resistance; particularly use for parquet
and wood furniture. |
| POLYCLEAR-WB-2828 |
Aromatic urethane-acrylic
copolymer WB top clear lacquer; excellent chemical
resistance and good abrasion resistance; particularly
use for parquet and wood furniture. |
| POLYCLEAR-WB-2929 |
Pigmented
Undercoat
|
Modified
acrylic copolymer WB white primer with ultra fast
drying properties; use for high-speed wood industrial
process. |
| POLYSTAIN-WB-2525 |
Stain
|
Acrylic copolymer
WB stain for wiping or shading stain on wood furniture. |
|
| • |
Stain
RFQ Quantity
|
| • |
Wood
Filler
RFQ Quantity
|
| • |
Thinner
RFQ Quantity
|
| |
|
| • |
Precatalyst
Lacquer (PC Lacqeur)
|
| |
|
Product
Name
|
System
|
Description
|
| POLYSEAL-PC-602 |
Clear
Sealer
|
Medium
solid PC sealer with medium viscosity, rapid drying,
good filling and easy to sand. |
| POLYCLEAR-PC-608
(Gloss/Matt) |
Clear
Topcoat
|
Single-pack
PC lacquer for wood furniture topcoat; fast drying,
good gloss retention, good retention, good hardness
and good abrasion properties. |
| POLYCOAT-PC-623
(White/Black) |
Pigmented
Undercoat
|
High
viscosity PC undercoat with good hardness and
good adhension for all timber substrates. |
| POLYPIGMENTED-PC-604
(White/Black/Colour/Gloss/ Matt) |
Pigmented
Undercoat
|
Fast dry pigmented
PC topcoat lacquer with good coverage, good abrasion
and good gloss retention; available in many colours. |
|
| |
|
| • |
HARDENER |
| |
|
Product
Name
|
Description
|
|
IRODUR
|
Accelerate
hardening process, increase bonding power, provide
high heat resistance and water resistance; suitable
for vulcanizing adhensive, graft adhensive and
PU range of materials. |
|
SOLUTION
BGL
|
Non-yellowing
aliphatic type of isocyanate; react with PU lacquer
to form cross-linkages with good hardness, fast
drying and durable properties. |
|
SOLUTION
BL
|
General
type aromatic isocyanate; react with PU lacquer
to form cross-linkages with good resistance. |
|
SOLUTION
BMB
|
General type of
aromatic isocyanate; react with PU lacquer to
form durable cross-linkages with good resistance. |
|
HARDENER
200
|
Para
toluene sulphonic acid based catalyst; apply with
AC lacquer to form a hard and resistant finishing. |
| CL123 |
Cross-linker used
in WB lacquers; help to improve the water, chemical
and abrasion resistance. |
|
| |
|
| • |
POLYTHINNER |
| |
|
Product
Name
|
Description
|
|
POLYTHINNER
223
|
Thinner
with medium evaporation rate; provide a good flow
finishing with AC topcoat |
|
POLYTHINNER
228
|
Thinner
that specially formulated for AC syatem; suitable
for disk application. |
|
POLYTHINNER
229
|
Slow
evaporating thinner; suitable for the application
of Automatic Spray for AC system. |
| POLYTHINNER
245 |
General
type of fast evaporating thinner; suitable for
the application on NC and AC system. |
|
POLYTHINNER
246
|
General type of
fast evaporating thinner; suitable for the application
on NC and AC system. |
|
POLYTHINNER
331
|
Thinner with medium
evaporating rate; suitable for the application
on PU system. |
| POLYTHINNER
332 |
Thinner
with medium evaporating rate provide a good flow
finishing with PU system |
POLYTHINNER 998
|
Thinner that specially
formulated for PU lacquer, suitable for disk application;
good wrapping and good flow properties. |
|
| |
|
| • |
POLYPUTTY/
POLYFIL/ POLYSTAIN/ POLYGEL/ POLYLINING/ POLYGLAZE |
| |
|
Product
Name
|
Description
|
|
POLYPUTTY-WB-33
|
Water-based
putty designed to fill and seal wood in a single
operation, eg.fill knotholes, splits, joints,
nail holes and blemishes in all types of wood;
good filling properties; available in many colours. |
|
POLYFIL-TB-42
|
Thinner-based
wood filter with good filling, fast drying and
easy to sand properties. |
|
POLYFIL-TB-43
|
Thinner-based
wood putty with good filling properties; available
in many colours. |
|
POLYFIL-OB-44
|
Oil-based wood filter;
good filling properties coupled with strong bonding
to grain and easy to work on; available in many
colours. |
|
POLYSTAIN-TB-30
|
Wood
stain with good clarity; specially designed for
toning effact; available in many colours. |
| POLYSTAIN-TB-55 |
Non-grain resistance
wood stain with good clarity properties and excellent
light fastness; suitable for shading and tinting
purpose; available in a range of colours. |
| POLYSTAIN-TB-66 |
Pigmented
wood stain that designed to give colour with excellent
clarity and fast drying properties; suitable for
shading and tinting purpose; cover a contrasting
colour wood filler to give a two-tone effect on
open wood veneer; available in many colours. |
| POLYSTAIN-OB-77 |
Oil based filler
stain particularly designed to exhibit good colour
reflection from the wood and the grain; good wiping
and good filling properties with excellent light
fastness; available in many colours. |
| POLYSTAIN-OB-D78 |
Oil-based
stain specially designed to raise the wood grain;
suitable for interior and exterior use; available
in a range of colours. |
| POLYSTAIN-OB-79 |
Oil-based stain
specially designed to raise the wood grain; excellent
light fastness, good wiping and good filling properties;
available in a range of colours. |
| POLYGEL-OB-73 |
Oil-based
pigment gel coat with excellent light fastness;
particularly designed to exhibit good colour from
the wood and the grain; good wiping and good filling
properties. |
| POLYLINING-TB-56 |
Pigmented wood stain
that offer lining effect; available in many colours. |
| POLYGLAZE-TB-58 |
Pigmented wood stain
for glazing purpose; available in many colours. |
|
| |
|
| • |
POLYAUTOTALIC |
| |
|
Product
Name
|
Description
|
|
POLYAUTOTALIC-AC-108/118/128/138/148
|
High
solid metalic pigmented two-pack AC coating; good
coverage and good gloss retention; available in
a range of colours. |
|
POLYAUTOTALIC-NC-868
|
High
solid metalic effect single-pack NC coating; good
coverage and good gloss retention; available in
a range of colours. |
|
POLYAUTOTALIC-PU-708
|
High
solid metalic effect two-pack PU coating; good
coverage and good gloss retention; available in
a range of colours. |
|
| |
|
| • |
POLYURETHANE
ADHENSIVE |
| |
|
Product
Name
|
Description
|
|
POLYURETHANE
2400
|
Adhensive
for bonding soft PVC, nylon, PU injected sole,
PU leather and etc. |
|
| |
|
| • |
WATER-BASED
ADHENSIVE |
| |
|
Product
Name
|
Description
|
|
POLYBOND-WB-818
|
56%
solid ethylene vinyl acetate copolymer emulsion;
specially formulated for the application on varnished
carton box side seam, carton flaps, wrapping industries
(eg.soap or chocolate) and fabric-to-PU foam. |
| POLYVAC-WB-555W |
37%
polyvinyl acetate homopolymer compounded adhensive;
specially formulated for the application of finger
joint, parquet and all types of wood assembly. |
|
| |
|
| • |
GRAFT
ADHESIVE |
| |
|
Product
Name
|
Description
|
|
PP
109
|
Strong
bonding adhensive for the application on PVC leather,
rubber soles, PVC, TPR, PU, canvas and etc. |
| PP
1000 |
Strong
bondig adhensive for the use on materials of high
absorbency, vulcanized rubber, leather, sponge,
canvas, EVA, TPR and etc. |
|
| |
|
| • |
CONTACT
ADHENSIVE |
| |
|
Product
Name
|
Description
|
|
PP
40 B
|
Sponge
adhensive; suitable for porous substrates like
PU foam, rubber sponge, carpet and etc. |
| PP
48S |
Adhensive
for shoes making using roller machine; suitable
for insole bonding shoe heels and leather shoes
as they require long tack time. |
| PP
68 RL |
Adhensive
for roller machine; suitable for bonding leather,
fabrics, EVA, canvas and gunny. |
| PP
80 TRANS |
Transparent
contact adhensive; suitable for PU foams joint;
prevent yellowing. |
| PP
101 |
Adhensive
for formica, plywood, architectural material furniture,
cloth, paper, wood and etc. |
| PP
101E |
Strong
bonding glue; suitable for adhensive of metal
rubber, glass, leather, wood, sponge, plastic,
paper products, cement, cloth and etc. |
| PP
118 HHR |
High
heat resistant bonding glue; suitable for products
that require high heat resistance, especially
rubber, wood, plastic, glass and etc. |
| PP
233 H |
Adhensive
for polyethylene; suitable for bonding polyethylene
foam to polyurethane foam, especially in helmet
industries. |
| PP
323 |
Adhensive
for carpet, cloth, sponges and etc. |
| PP
9100 |
Non-flammable
sprayable adhensive that is suitable for fabric-to-
polyurethane foam in office furniture; particularly
designed for the use in air-automation spray equipment. |
| PP
PEXA |
Good
bonding glue for PU foam, carpet, shoe heels,
paper products and clothes. |
| PP
100 SPA |
High
resistant sprayable contact adhensive; good bonding
properties. |
| PP
300 SPB |
Sprayable
contact adhensive for general purposes. |
| PP-8-HTG |
Flexible
coating for shoes making; mainly use for internal
PVC shoes shape forming. |
|
| |
|
| • |
Primer
|
| |
|
Product
Name
|
Description
|
|
PP
001
|
PVC
and PU treating agent; mainly for treating difficult
and hard PVC surfaces; suitable for PU and graft
adhensives. |
| PP
002 |
PVC
treating agent; particularly for treating difficult
and hard surfaces. |
| PP
2000 |
EVA
treating agent; suitable for PU and graft adhensives. |
| PP
3000 |
PVA
treating agent; suitable for the application on
man-made leather, cloth and film. |
| PP
4000 |
Rubber
treating agent; suitable for graft adhensives. |
| PP
5000 |
TPR
treating agent; specially for treating TPR injected
sole; suitable for PU and graft adhensives. |
|
| |
|
| • |
OTHERS |
| |
|
Product
Name
|
Description
|
|
POLYCLEAR-ACY-777
|
Arcylic
based UV resistant lacquer; suitable to apply
on wood substrates for interior and exterior finishing. |
| POLYCLEAR-ACY-778 |
Acrylic
based UV protective coating; specially developed
for the application on plastic substrates (eg.polycarbonate);
durable and excellent yellowing resistance. |
| POLYWOOD-STOP-10 |
Hogh
solid acrylic-based wash coat with fast drying
properties; help to prevent high absorption at
the edge of wood or MDF board |
| POLYWAX-800A |
Polishing
wax for natural timber; help to increase the mar
and slip properties; suitable for interior and
exterior use. |
| POLY-S-BOND
PVU-1020 |
Specially
developed for hard wood lamination; suitable for
rubber wood, meranti, ramin, oak and ash. |
| EP(A) |
Two-pack
high performance adhensive with very strong bonding
strength; mainly used for laminating parquet and
vinyl tiles on high moist floor; self-levelling
agent. |
| HP
(B) |
Cross-linking
agent for EP(A); light yellow in colour with ammonia
cal odour. |
| TEAK
OIL |
Modified
vegetable oil; protect the natural feel of wood;
suitable for interior and exterior use. |
| URETHANE
OIL |
Modified
urethane oil; excellent exterior protection to
wood. |
| Other
Product Range: |
Spattering
Stain, Sub-stain, Pre-stain, Barrier Coat, Cracking
Finish, Marble Effect. |
|
| |
|
| • |
MISCELLANEOUS |
| |
|
Product
Name
|
System
|
Description
|
POLYSTAIN
TB 60
|
PIGMENTED
STAIN
|
Pigmented
wood stain that designed to give colour with
excellent clarity and fast drying properties;
suirtable for shading and tinting purposes;
cover a contrasting colour wood filler to give
a two tone effect on open wood veneer; available
in range of colours.
|
| POLYSTAIN
TB 5033 |
NGR
STAIN
|
High
solid of non grain resistance wood stain with
good clarity and excellent light fastness; suitable
for shading and tinting purposes; availabe in
range of colours.
|
| GEL-STAIN
PP 78 |
GEL-STAIN
|
Specially
formulated gel pigemented wood stain for glazing
purpose ; good wiping and filling properties;
for indoor and outdoor use.
|
|